After the Gateway Configuration has been
setup, this screen can be used to define the notification codes
that control the severity level of those codes and when the
notifications get sent.
The default codes for the Data Tags can also
be defined.
Use the following configuration utilities to structure your firm's alert process:
Notification Times - setup for notification codes to control when notifications get sent, and defaults for Data Tags
Data Tags - defines individual alarm codes retrieved by DPL with optional action notes to email, and the email retry and interval values
Notification Matrix - groups the Data Tags into categories or Levels that can be assigned to Service Managers and Site Superintendents as Notify Levels
Division Setup - setup divisional equipment Service Manager to receive alerts, with time offset for different time zones
When the Notification Times option is selected from the Configuration radio group, the following fields can be defined:
Note: Times should be entered using a 24 hour clock.
i.e. 5:30PM should be entered as 17:30
Note: If a store or division is located in a different time zone, an off-set time can be defined in the Division Setup to allow for the time difference.
Note: A Notification Code cannot be deleted if has been assigned to one or more Data Tags.
Converted from CHM to HTML with chm2web Pro 2.85 (unicode) |